home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
kermit.columbia.edu
/
kermit.columbia.edu.tar
/
kermit.columbia.edu
/
newsgroups
/
misc.19950726-19950929
/
000449_news@columbia.edu_Fri Sep 29 07:37:51 1995.msg
< prev
next >
Wrap
Internet Message Format
|
1995-12-25
|
2KB
Received: from apakabar.cc.columbia.edu by watsun.cc.columbia.edu with SMTP id AA17690
(5.65c+CU/IDA-1.4.4/HLK for <kermit.misc@watsun.cc.columbia.edu>); Sat, 30 Sep 1995 15:10:27 -0400
Received: by apakabar.cc.columbia.edu id AA22753
(5.65c+CU/IDA-1.4.4/HLK for kermit.misc@watsun); Sat, 30 Sep 1995 15:10:26 -0400
Newsgroups: comp.protocols.kermit.misc,comp.sys.novell,bit.listserv.novell,uhawaii.network
Path: news.columbia.edu!panix!tinman.dev.prodigy.com!prodigy.com!uunet!in1.uu.net!usc!howland.reston.ans.net!news.sprintlink.net!usenet.kornet.nm.kr!ames!news.hawaii.edu!uhunix4.its.Hawaii.Edu!mtom
From: Michael Tom <mtom@uhunix4.its.Hawaii.Edu>
Subject: Telnet TermType using LWP5 TSU?
X-Nntp-Posting-Host: uhunix4.its.hawaii.edu
Content-Type: TEXT/PLAIN; charset=US-ASCII
Message-Id: <Pine.SV4.3.91.950928210541.14408A-100000@uhunix4.its.Hawaii.Edu>
Sender: news@news.hawaii.edu
Organization: University of Hawaii
Mime-Version: 1.0
Date: Fri, 29 Sep 1995 07:37:51 GMT
Lines: 26
Xref: news.columbia.edu comp.protocols.kermit.misc:3717 comp.sys.novell:92881 bit.listserv.novell:87200
Apparently-To: kermit.misc@watsun.cc.columbia.edu
When using MS-Kermit 3.14 as a Telnet client over Novell LAN WorkPlace 5,
how does one set the Telnet terminal type? My batch file essentially
contains the following commands:
telapi -sn1 -st1
tsu -o 128.171.44.54 k1
tsu -a k1 1
kermit set port bios1, connect
I figure that I need to insert the command "tsu -f <telnet-parameter> VT100",
but what's the correct keyword for <telnet-parameter>? I've guessed at
TERM, TERMTYPE, TERM-TYPE, TERMINAL, and TT with no luck.
Our workaround is to set the terminal type after logging in to the UNIX
host by issuing a "setenv TERM" command. Since this is running in a lab
setting, though, it will save a lot of grief to just fix the TSU/Kermit
startup commands rather than having hundreds of users adopt the setenv
workaround. And it should be easy -- everything works fine if I run TSU
in interactive mode to open and configure the Telnet session before running
Kermit; I just need to know the equivalent batch-mode TSU commands.
Thanks for any help!
Michael Tom
Academic Computing Coordinator
Windward Community College